Hynin

Instructions

• Manual Tajima Tmef H 904 Parts
• Manual Tajima Tmef H 904 Sewing Machine
• Manual Tajima Tmef H 904 Manual
• Manual Tajima Tmef H 904 R

(C) 2009-2018 PLR Electronics

Basics

Manual tajima tme h - user's guide tajima tme h User's Guides, Owner's Manuals, Service Manuals, Instructions Books - The largest database - Immediate download or research services Tajima owner manuals tricia joy Search and Read Downloadable tajima embroidery machine manuals User Manuals for Free, We Have Collection of User Guide or Owners. The TMEZ from Tajima is the world's first embroidery machine with automatic thread tension adjustment! I-TM technology eliminates the need for manual tension adjustment from the operator. The presser foot automatically detects the fabric thickness and evaluates the upcoming stitch type.

Listed below are embroidery machine manuals and parts lists. Tajima Parts Lists: Tajima TFMX-IIC 2009.03 Tajima TFMX-IIC 2007.02 Tajima TFMX-IIC 2005.07 Tajima TFMX-IIC 2004.11 Tajima TEMX-C Multi Head 2008.05 Tajima TEMX-C Single Head 2011.08 Tajima TEMX-C Single Head 2008.03 Tajima TFHX-IIC 2002.02 Tajima TEHX-C Mult. We believe that 'BASICS TAJIMA EMBROIDERY MACHINES' and 'MACHINE SETUP INSTRUCTIONS' are useful to deepen your knowledge about this product. Please also read those booklets. Regarding how to handle the products related, refer to the user’s manual exclusive for them included in the manual CD. Tokai Industrial Sewing Machine Co., Ltd. Barudan Brother Happy Juki Melco Tajima Toyota Product Brochures Tax Forms. Cap Frame 1998.04 Cap Frame 1999.02. TMEF-H 1993.12 TMEF-S 1989.01 TMEX C101. Tajima TMEF-600: Embroidery Machines: Tajima TMEF-H: Embroidery Machines: Tajima TMEF-S: Embroidery Machines: Tajima TMEF-V: Embroidery Machines: Tajima TMEG-X: Embroidery Machines: Tajima TMEX-C: Embroidery Machines: Tajima TMFD-620: Embroidery Machines: Tajima TMFD-904: Embroidery Machines: Tajima TMFD-904 1204: Embroidery Machines: Tajima. #10660 - Tajima TME DC 912 IDM/IMM and control panel Final Test - S. ManciniTajima Embroidery Operation - Frame forward or backwards in a running design (back up or go ahead). Tajima tmeg g 915 Tajima TMEF- H612, TMEG-XG1212, TMFD -G1215 HELP ME THREAD THIS TAJIMA EMBROIDERY MACHINE: Got A Special Package (S:07/Vlog 012) TAJIMA TEJT-C.

Main buttons (on the bottom left)

• DISPLAY: Change the information shown on the main screen. (N.SELECT, TAPE CODE, REPEAT, STITCH, ERROR)
• ORIGIN: Return to the start position. Press ORIGIN, then SET. Make sure home position is programmed.
• SELECT: To change the color change sequence.
• REPT: Repeat function.
• T.CODE: To load a new design.
• SET: To make a selection.
• RESET: To cancel errors.

Option buttons (top middle).

• COORD: To rotate the design. P and one blinking light is normal. Press STEP to change to 45 degree mode (two blinking lights). Press SET to make it stop blinking.
• A.CHNG: To switch between automatic and manual color change.
• A.STRT: To turn on automatic start after a color change.
• FRAME: To allow frame to be moved manually during sewing.
• D.SET: Press after you have chosen a new design, and have finished with options.

Edit buttons (bottom right)

• NUMERIC KEYPAD 0-9: Manual color change immediately. Also to insert values.
• STEP: To browse through menu options
• C: Clear button.
• MODE: To change a parameter.
• ERASE: Used in the memory erase function
• MRY: Memory Erase button; used in the erase-all function

Main menu list

• N.SELECT: To show the current automatic color sequence
• TAPE CODE: To show the loaded design
• REPEAT: To show the repeat settings
• STITCH: To show the stitch count. Press C to reset the count.
• REPEAT: To show the repeat settings
• ERROR: This menu is shown only when there is an error. Press RESET to clear.
• ALL LIGHTS: To show the current resize/scale setting.

Status lights

• STOP P.: Lights up when your main shaft is at the STOP position, marked in RED on the flywheel.
• JUMP, STOP, END: Lights up when you are at a JUMP code, STOP code, or END code.

Bar switch and button (under table)

• BAR SWITCH LEFT: Pull bar to the left to stop, or to go back one stitch
• BAR SWITCH RIGHT: Pull bar to the right to start; same as the green buttons.
• INCH BUTTON: Inching or Jog button. This is NOT an ATH button.

Frame move

• ARROW KEYS: Cause the frame to move manually.

Load a new design

1. Press TAPE CODE.
2. Press the 2 key and then press SET.
3. The blinking number is the first empty memory location for your new file.
4. Change this number, or leave it. Press the SET key when done.
5. Press the D.SET key. This will start the download from tape process.
6. Completion! Be sure to set a new offset for this memory location or it will use the old one.

You don’t have a Tape Reader? Purchase a newUSB Readerfor your Tajima TME-HC machine! Look at the front page of PLR Electronics!

Select a design in memory

1. Press TAPE CODE.
2. Press the 5 key and then press SET.
3. Choose a design by typing in the number.
4. Press SET when you have the number you want.
5. If you want to rotate the design, you do it now. Press COORD to rotate, and press SET when done. STEP will change between rotating 90 degrees (one blinking light) or 45 degrees (two blinking lights).
6. Press D.SET to continue with the process.
7. The screen will ask for a resize value. Accept the standard 100% value by pressing SET.
8. Make sure your offset is programmed or cleared, or the frame will move where you don’t expect.
9. To clear offsets, Press MODE, then 4, then SET.
10. Choose a start point with your manual arrow keys. Do NOT press SET again, or that will be the offset.
11. You are ready to start sewing!

Setting color change

1. Press the SELECT button.
2. The first color change will be chosen for editing, and the current color selection is blinking.
3. Press the number keys to choose a new color.
4. Press STEP to confirm, and move to the next color.
5. If the E is blinking, then no color has been chosen yet. Pick a color and press STEP.
6. When you wish to stop, choose a number and press SET instead of STEP.
7. Finished! Don’t forget the automatic color change and auto-start buttons, if you want it to be active.

Erasing design in memory

1. Press MODE, then press 1, then press SET.
2. Press ERASE, then press SET.
3. The top right screen will activate, asking which number to delete.
4. Type in the design to erase with the number pad.
5. Press SET to erase the chosen design.
6. Press MODE when done erasing designs.

Erasing all designs

1. Press MODE, then press 1, then press SET.
2. Press ERASE, then press MRY, then press SET.
3. Wait a few seconds. All designs should now be erased.

Error codes

Press the RESET button to cancel most errors.

• ERROR E-02, E-03, E-04: Tape data error.
• ERROR E-06: Memory error. Please clear all memory.
• ERROR E-08, E-09: Reader error; try again.
• ERROR E-11: Data set not done correctly. Choose design from beginning.
• ERROR E-12: Cannot stitch backwards that far.
• ERROR E-13: Offset problem. Clear offset.
• ERROR E-16: Memory is empty. Load a design first.
• ERROR E-17: Memory is full. Clear designs.
• ERROR E-18: This design is erased. Choose another.
• ERROR E-19: Memory is full. Clear designs.
• ERROR E-30, E-31: Stop bar chosen at wrong time.
• ERROR E-51: Stop position error. Please set main shaft until STOP P. is lit.
• ERROR E-52: Limit switch. X or Y at the limit; adjust sensors if too small.
• ERROR E-53: XY Driver problem.
• ERROR E-54: Limit switch problem.
• ERROR E-55: Color change motor not moving. Inspect.
• ERROR E-56: Half-turn cam troble. Check color change.
• ERROR E-57: Color change needle position error. Check color change.
• ERROR E-58: Main motor not spinning. Check to see if polarity needs to be reversed on the three phase 220V brake box.

(C) 2009-2010 PLR Electronics

Instructions

Manual Tajima Tmef H 904 Parts

(C) 2009-2018 PLR Electronics

Basics

There are four kinds of the Tajima TME-HC machine:

• TME-H: Flat frame, main motor underneath the control panel. Underneath bar switch.
• TME-HC: Cap frame, main motor behind the machine. ON/OFF buttons instead of bar switch.
• TMEF-H: Flat frame, main motor to the far left. Under bar switch.
• TMEF-HC: Tubular frame, with hydraulic table. ON/OFF buttons instead of bar switch.

Main buttons (on the right)

• NUMBER PAD: To enter a 1-9 value.
• NUMBER PAD ARROW KEYS: Overlays the number keys. To manually move the frame, or the hydraulic table.
• BLUE ARROW KEYS: To move through the menu.
• +1 and -1: To scroll through submenus, such as the color change sequence.
• RESET: To cancel errors
• SET: To make a selection
• ERASE: Part of the erase design function
• SEL (SELECT): To scroll through available choices, usually for ON/OFF settings.
• RESET: To cancel errors.

Main menu list

• ROW 1, Design Select: To load a design from a Reader, or choose a design from memory.
• ROW 2, Color Change: To set the color change sequence.
• ROW 3, Information: To show RPM and number of stitches.
• ROW 4, Manual Control: To show errors, stop position, and manually control ATH, current needle, and the frame.
• ROW 5, Maintenance and Editing: To change parameters.

Status lights

• STOP POSITION: Lights up when your main shaft is at the STOP position, marked in RED on the flywheel. This light is located in ROW 4, Manual Control, POS, next to where it says STOP FACTOR.
• CURRENT NEEDLE: Shows a number of your current needle position. This number is located in ROW 4, Manual Control, COLOR. Will display C or a backwards C whenever you have gone past the last needle or before the first needle. Will also display if the dipswitches are set for CAP FRAME.

Bar switch and button (under table, certain models only)

• BAR SWITCH LEFT: Pull bar to the left to stop, or to go back one stitch
• BAR SWITCH RIGHT: Pull bar to the right to start.

Frame move, ATH, RPM

• MOVE FRAME: Use the NUMBER PAD ARROW KEYS. Make sure you are first on menu location FRAME, which is in Row 4, Manual Control, FRAME. Press the [5] key to switch between high speed and low speed.
• IMMEDIATE THREAD TRIM: Make sure you on menu item ATH, which is in Row 4, Manual control. Press 1, then SET.
• CHANGE R.P.M. SPEED: During stitching, press the NUMBER PAD ARROW KEYS up or down. [8] increases speed, and [2] decreases speed.

Load a new design

1. Move the cursor to the TAPE position, in Row 1, TAPE.
2. Press the 2 key and then press SET.
3. The blinking number is the first empty memory location for your new file.
4. Change this number, or leave it. Press the SET key when done.
5. The rotation option will blink now. It defaults to 1, which is no rotation. Press SET to accept.
6. The scale option will blink now. It defaults to 100 percent. Press SET to accept.
7. The final choice is to start data input from the reader. Press 1 and SET to begin the download process.
8. Completion!

You don’t have a Tape Reader? Purchase a newUSB Readerfor your Tajima TME-HC machine! Look at the front page of PLR Electronics!

Select a design in memory

1. Move the cursor to the TAPE position, in Row 1, TAPE.
2. Press the 5 key and then press SET.
3. The first memory location with a stitch file will display. Type in the desired number, or use the +1 -1 numbers to scroll through the selections.
4. Press the SET key when done selecting.
5. The rotation option will blink now. It defaults to 1, which is no rotation. Press SET to accept.
6. The scale option will blink now. It defaults to 100 percent. Press SET to accept.
7. The final choice is to accept the data. Press 1 and SET.
8. Completion!

Setting color change

1. Move the cursor to the AUTO/MANUAL position, in Row 2, AUTO/MANUAL.
2. The automatic color change light will blink. Automatic mode will blink [0], and manual mode will blink [-].
3. Press the SEL (SELECT) key to switch between automatic and manual mode.
4. Press SET when done. If you have chosen manual, these instructions stop here.
5. The process will start from the first color. Press SET to continue.
6. The needle for the current color will blink. Type in the desired needle number.
7. Press the [+1] key to accept and go to the next color change.
8. If you made a mistake, you can press the [-1] key to go backwards.
9. Repeat the process until all colors are programmed.
10. When finished, then press the SET key immediately after pressing the [+1] key.

Erasing design in memory

1. Move the cursor to the TAPE position, in Row 1, TAPE.
2. Press the 5 key and then press SET.
3. Now choose the design you wish to erase with the number keys.
4. Press ERASE, then press SET.
5. Wait a few moments until completion.

Erasing all designs

1. Move the cursor to the TAPE position, in Row 1, TAPE.
2. Press the 5 key and then press SET.
3. For the design number, choose 0.
4. Press ERASE, then press SET.
5. Wait a minute until completion.

Manual Tajima Tmef H 904 Sewing Machine

Tajima Error Codes

Press the RESET button to cancel most errors. You may have to change menus to the STOP FACTOR menu.

Manual Tajima Tmef H 904 Manual

• 211: Stop position error. Manually move main shaft until at stop position, or try the ATH operation.
• 221, 222, 223, 224: Limit switch is tripped. Check position of limit switches compared to the frame’s position. Adjust if needed.
• 225: Cap frame travel past X limits.
• 281: Color change timeout. Check the color change motor and mechanicals.
• 2B1, 2B2, 2B3, 2B4, 2B5, 2B6: Problem with the tape reader. May give several errors, please reset them all before trying the tape reader again.
• 2B7: Please select design again.
• 2B9: Memory Error. Try the erase-all-designs function.
• 2BB: Frame back exceeded. Stop going backwards.
• 2BC: Please select another design.
• 2C1: Start button pressed while control panel is busy.
• 2CD: Design corrupted due to power loss. Reload design.
• 312: Encoder problem. Check the encoder line.
• 314: Main shaft not rotating. Check if the RED light on the main motor brake box is lit; if so, reverse two wires in your 3-phase power plug. Check magnetic contactor next to the main power relay.
• 321: DU-10 XY driver reporting problem. Check if both lights are green, on the DU-10 box.
• 324: Excessive slowdown during sewing. Lower RPM or check mechanicals or fabric.
• 325: Cap frame sensor error.
• 382: Color change motor not moving. Check motor and encoder.
• 383: Needle position problem. Check color change needle position and manually move to proper position if needed.
• 384: Encoder problem. Check encoder.
• 3A2: Thread trimmer problem.
• 3D3: Computer failure error. Check cabling that nothing is unplugged; reseat cables.

Manual Tajima Tmef H 904 R

(C) 2009-2018 PLR Electronics